Product ID:RESIN BOUND LINING STRIPS FOR BRAKES: NU-2G
MSDS Date:03/01/1989
FSC:2530
NIIN:00D003118
MSDS Number: BRSYH

NUTURN CORP.

570 METROPLEX DRIVE
NASHVILLE, TN 37211
US

Emergency Phone: 615-597-6700

Info Phone: 615-834-3800

Cage: NUTUR

NUTURN CORP.

NASHVILLE, TN 37211 US

Telephone: 615-834-3800

Cage: NUTUR

MICA - SILICATES (< 1% CRYSTALLINE SILICA)

CAS: 12001-26-2

RTECS: VV8760000

Fraction By Weight: <13%

OSHA PEL 20 MPPCF

ACGIH TLV: 3 MG/M3 RDUST; 9293

GRAPHITE, NATURAL (MFR DESCRIBES ONLY AS GRAPHITE W/O CAS

CAS: 7782-42-5

RTECS: MD9659600

Fraction By Weight: <1.5%

OSHA PEL 15 MPPCF RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9293

CERAMIC FIBER (LISTED BY MFR AS NON HAZARDOUS BUT WITH A

ARAMID FIBER (LISTED BY MFR AS NON HAZARDOUS BUT WITH A

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-TEMPORARY IRRITATION OR RASH MAY
OCCUR ON SKIN OF SOME INDIVIDUALS IN PROLONGED CONTACT. DUST MAY
BLOCK AIRWAYS, REDUCE VISIBILITY AND CAUSE UNPLEASANT DEPOSITS IN
EARS, EYES & NASAL PASSAGE. CH RONIC-LUNG DAMAGE CAN RESULT FROM
EXTENDED EXPOSURE WITHOUT A RESPIRATOR.
Explanation of Carcinogenicity:THE PRODUCT CONTAINS NO INGREDIENT AT
0.1% OR GREATER THAT IS LISTED BY IARC, NTP OR OSHA AS A
CARCINOGEN.
Effects of Overexposure:ACUTE: COUGHING AND SNEEZING. CHRONIC: CHRONIC
PNEUMOCONIOSIS.
Medical Cond Aggravated by Exposure:NO INFORMATION GIVEN ON MSDS BY
MFR.

First Aid:AVOID BREATHING DUST AND FIBER. IF INHALED, REMOVE TO FRESH
AIR. DRINK WATER TO CLEAR THROAT AND BLOW NOSE. (IF DUST IS
GENERATED ABOVE TLV, RESPIRATORS MUST BE WORN.) GOOD HYGIENE
RECOMMENDED BY WASH ING HANDS AND FACE WITH SOAP AND WATER PRIOR TO
EATINGOR SMOKING. IF SKIN IS SENSITIVE, A SOOTHING OINTMENT MAY BE
APPLIED TO IRRITATED SKIN AFTER CLEANSING.

Flash Point:>1112F,>600C
Extinguishing Media:WATER FOG, CARBON DIOXIDE, FOAM, OR DRY CHEMICAL.
USE THAT WHICH IS APPROPIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NO EXPLOSION HAZARD, FLAMMABLE ONLY IN
OXYGEN RICH TEMPERATURES IN EXCESS OF 600C.

Spill Release Procedures:AS MANUFACTURED ALL PRODUCTS ARE BOUND.
VIBRATION IN SHIPPING MAY CREATE SMALL AMOUNTS OF DUST/FIBER. DO
NOT INHALE DUST. IF DUST IS CREATED, VACUUM OR WET PRIOR TO
REMOVAL. DO NOT USE COMPRESSED AIR. USE WATER OR DUST SUPPRESSANT
TO REMOVE DUST.
Neutralizing Agent:NO INFORMATION GIVEN ON MSDS BY MFR.

Handling and Storage Precautions:MONITOR TO DETERMINE DUST/FIBER IS
ABOVE TIME WEIGHTED AVERAGES. CLEAN STORAGE AREA OF DUST BY
VACUUMING. KEEP AIRBORNE DUST TO A MINIMUM.
Other Precautions:NONE

Respiratory Protection:RESPIRATOR TO COMPLY WITH OSHA STD. 1910.134 OR
OTHER NIOSH/MSHA APPROVED RESPIRATOR IF TLV'S EXCEEDED.
Ventilation:USE ADEQUATE EXHAUST VENTILATION WHEN GRINDING OR
MACHINING. MECHANICAL (GENERAL) REMOVE WEAR DUST WITH HEPA FILTER
VAC.
Protective Gloves:GLOVES MAY BE WORN.
Eye Protection:SEE OTHER EQUIPMENT
Other Protective Equipment:EYE PROTECT: COMPLY W/ OSHA 1910.133. IF
>TLV, DO NOT WEAR CONTACTS. USE GOGGLES FOR MACHINING. FLUSH EYES
IF IRRITATED.
Work Hygienic Practices:PRACTICE GOOD HYGIENE; WASH THOROUGHLY AFTER
HANDLING. DO NOT WASH DUST LADEN CLOTHING WITH OTHER ITEMS.
Supplemental Safety and Health
KEY2:KT COMPLY WITH OSHA 1910.132, .133, .134.

HCC:N1
NRC/State Lic Num:NONE
Spec Gravity:1.2-1.4
Solubility in Water:INSOLUBLE
Appearance and Odor:REDISH-BROWN TO GREY-BLACK FRICTION MATERIAL WITH
RESINOUS OIL OR RUBBER ODOR.

Stability Indicator/Materials to Avoid:YES
NO KNOWN INCOMPATABILITIES
Stability Condition to Avoid:NO INFORMATION GIVEN ON MSDS BY MFR.
Hazardous Decomposition Products:NO INHERENT HAZARDOUS DECOMPOSITION
PRODUCTS.
Conditions to Avoid Polymerization:WILL NOT OCCUR

Waste Disposal Methods:SCRAP PIECES SHOULD BE DISPOSED OF IN A WAY AS
TO PREVENT AIRBORNE DUST AND FIBER. PLACE DUST FROM USE IN AIRTIGHT
CONTAINERS, MARKED PROPERLY AND PLACE IN A LANDFILL WHICH
HANDLESTHIS PRODUCT IN COMP LIANCE WITH ALL FEDERAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.